Overview

THSER102 Rx Board with Raspberry Pi 4 Model B

Adding some outstanding features to the previous THSER101, the THSER102/THSER102A allows Raspberry Pi Camera to be moved many METERS away from Raspberry Pi Computer!

Key Features: (New Features Circled)

Raspberry Pi 5 is Now Supported in addition to Pi 4 Model B and others!
Raspberry Pi Camera Module 3 is Now Supported in addition to V1/V2/HQ!
>10-meter Extension with Standard LAN Cable
Plug & Play
- No Software Configuration Needed
- Camera Works as if THSER102/THSER102A does not Exist!
Advanced Applications Supported
- HAT on HAT
- 3ch GPIOs Extension
20% Lower Power Consumption

Supports Raspberry Pi Camera Module 3

THSER102 Tx Board with Raspberry Pi Camera Module 3

The new THSER102 and THSER102A support Raspberry Pi’s latest Camera Module 3!

THSER102 Supports:

Raspberry Pi Camera V2
Raspberry Pi High Quality (HQ) Camera
Raspberry Pi Camera Module 3

THSER102A Supports:

Raspberry Pi Camera V2
Raspberry Pi High Quality (HQ) Camera
Raspberry Pi Camera Module 3
Raspberry Pi Gloabal Shutter (GS) Camera

Supports HAT on HAT

HAT (Hardware Attached on Top) Options Available

The GPIO connector of THSER102/THSER102A is repeatable. Thus, you can add another HAT on top of the THSER102.

3ch GPIO Extension

3ch Camera-Computer GPIO Communication Extension Available

The THSER102/THSER102A supports 3 pins per one side for 3 GPIO lines. You can use the lines for various camera related signals, e.g., shutter button at Camera, LED control from Computer.

Supported GPIO:

From Computer to Camera | 1 GPIO
From Camera to Computer | 2 GPIOs

20% Lower Power Consumption

Thanks to hardware architecture optimization, we successfully reduced the power consumption of the kit, allowing the total (Camera and the THSER102/THSER102A) power to be 4 fifth of the previous solution (Camera and THSER101).

Power Comsumption Example: