Kit Solutions | CDK | Demo
OV2740 Setup for Endoscope Applications
Introduction
This Demo shows an example of using the THine CDK to customize ISP firmware for a user selected Image Sensor.
By adding an easy to develop header board with the user selected Image Sensor to the CDK, the user can develop the ISP firmware themselves to their requirements.
In this example, we introduce a special setup for Endoscope Applications using the popular OmniVision OV2740 Image Sensor.
Overview
We prepared following items.
Hardware for CDK
Frame Grabber Board Set called MU-3
ISP Board with THP7312
Windows PC
Pillars and other hardware
Special Header Board consisting of:
OV2740 module
2 LEDs
LED Brightness Controllers
Sea Spikes Pod
A colorful object widely used in Medical vision industry, available at Chamberlain Group.
Blackout Curtains
This is to emulate the endoscope environment shutting any light except for LEDs on the hardware.
Hardware Setup
We built a special Header Board with OV2740 sensor module and 2-pc LED sitting horizontally to other CDK Hardware boards. (The reference Header Board that comes with the rest of CDK Hardware stands up vertically so the camera faces forward.)
Software Setup
We built an OV2740 Sensor Driver for our ISP THP7312. Using CDK tools, we confirmed many features of the OV2740 are configurable.
Blogs, Whitepapers, and Reviews
Kit Solutions | Camera Development Kit (CDK) Ver. 2.2 | THine Solutions, Inc.
Whitepaper/Review | THine Camera Development Kit (CDK) speeds up time to market for medical device start-up | By Russell Lemburg | Evergaze LLC
News Update | THine Introduces a Standalone ISP and Firmware Development Tools to Stream Uncompressed 4K 30fps Video | THine Solutions, Inc.